Conveyor belt mechanical joint method: usually refers to the use of belt buckle joints. This joint method is convenient, fast, and relatively economical, but the power of the joint is low and it is easily damaged, which has a certain impact on the service life of the conveyor belt product. In PVC and PVG whole core flame-retardant and anti-static conveyor belt joints, this joint method is usually used for products with grade 8 or below.
Cold bonding method for conveyor belts: using cold bonding adhesive to make joints. This type of joint method has higher power and is more economical than mechanical joints, and should have a better joint effect. However, from the internship, it is difficult to grasp the technical conditions, and the quality of other adhesives has a significant impact on the joint, so it is not very stable.
Conveyor belt hot vulcanization joint method: Internship has proven to be the most ideal joint method, which can ensure high joint power, stability, and long joint life. It is easy to grasp. But there are defects such as technical complexity, high cost, and long connection time.
There are several commonly used methods for connecting conveyor belts, such as mechanical joints, cold bonding joints, and hot vulcanization joints.
Mechanical joints usually refer to the use of belt buckle joints, which are convenient, fast, and relatively economical. However, the low power and simple damage of the joints have a certain impact on the service life of conveyor belt products. In PVC and PVG whole core flame-retardant and anti-static conveyor belt joints, this joint method is usually used for products with grade 8 or below.
Cold bonded joints refer to the use of cold bonding adhesive for joints. This type of joint method has higher power and is more economical than mechanical joints, and should have a better joint function. However, from the perspective of internship, due to the valuable grasp of technical conditions, the quality of other adhesives has a significant impact on the joint, so it is not very stable.
Hot vulcanization joint has been proven to be the most ideal joint method during internship, which can ensure high joint power, stability, and long joint life. It is simple and easy to grasp. But there are defects such as technical complexity, high cost, and long joint operation time.
This article is from:
http://m.e-testing.net.cn