The use of mechanical equipment is very extensive, and it can be said that our lives are inseparable from it. There are many products of mechanical equipment that we are familiar with, but many people may not be familiar with the transportation assembly line. For those who don't know, how to choose and operate the transportation assembly line is a major challenge.
How to choose a shipping assembly line
As a manufacturer, a good assembly line equipment is related to the production power. When choosing assembly line equipment, it is important to pay attention to whether the assembly line method meets the production needs. Secondly, when choosing an assembly line, attention should be paid to the functions and effects of each part of the assembly line. Such assembly line equipment is the real demand of the enterprise. When choosing a transportation assembly line, it is important to understand the assembly line methods: 1. Classified by function: ① Production assembly line ② Transportation assembly line 2. Transportation methods: ① Flat linear transmission assembly line ② Various viewpoint flat turning transmission assembly line ③ Slope uploading assembly line ④ Slope downward transmission assembly line.
Explanation and analysis of the operation of the transportation assembly line
1. Electrical operation summary: The power requirement for the assembly line is three-phase four wire, with a main switch installed outside (a three-phase four wire four pole switch can be used, or a switch can be used to control only the three-phase power supply, with the neutral wire directly connected. Be careful not to pass the neutral wire of the second connection through another switch). The N line of the distribution box is connected to the neutral wire, A, B, and C are connected to the three-phase power supply of the power supply, U, V, and W are connected to the motor, and 3 and 4 are connected to the F1, F2, 5, 6, and 7 of the speed regulating motor. 2. To start the motor, first connect the power supply. At this moment, all three power indicator lights will light up, confirming that the three-phase power supply has arrived at the distribution box. At this moment, you can press the blue button for turning on the motor to start it. If it cannot be started, you can open the distribution box door and check if the second DZ108 switch in the first row is long in red and short in blue. If you don't press down on this blue one. After starting the electric motor, turn on the switch of the speed control meter on the assembly line, and gradually increase the potentiometer of the speed control meter to reach the desired speed.
This article is from: http://m.e-testing.net.cn
09-12
How to choose the right conveyor assembly line?
As an efficient production method for enterprises, conveyor lines are increasingly being adopted and installed by more and more companies. So, for companies that do not have equipment or are preparing
09-12
Common faults and countermeasures analysis of bucket elevator
1. BlockageThe tail casing is filled with materials, causing the belt to slip or fail to work.reason:1) The feeding machine starts early and the elevator starts late;2) The belt slips due to lack of t
09-11
Common problems with conveyors
What are the factors causing motor overheating during conveyor operation?(1) Poor heat dissipation conditions; (2) Overloaded working hours are too long; (3) It is possible that the motor bearings a
09-11
Considerations for adjusting the feed inlet of bucket elevator
The adjustment of the feeding port should ensure that the material at the feeding port is evenly spread in the width direction to prevent uneven feeding that may cause the feeding of the bucket elevat